| Customization: | Available |
|---|---|
| Color: | Silver |
| Application: | Transportation Tools, Door & Window, Glass Wall, Heat Sink, Decorations, Tool Box |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Diamond aluminium tread plate or floor plate is widely used for a variety of structural, architectural and cosmetic applications. A method has been developed to roll metal plates with an upraised "lug" pattern, providing the customer with several choices to best meet the needs of the project, with specific qualities of cleanability, impact resistance, support strength, and corrosion resistance.
3003 diamond aluminum tread plate has good corrosion prevention ability, so it can be used for ship deck, floor of the cold storage, truck floor and body. Our customers also use it to make boxes, for decoration. Besides, it is widely used in construction
3003 is an AL-Mn alloy, which is the most widely used rust-proof aluminum. The strength of this alloy is not high (slightly higher than industrial pure aluminum) and cannot be heat-treated. Therefore, cold working is used to improve its mechanical properties: It has high plasticity in the annealed state, good plasticity in semi-cold hardening, low plasticity in cold work hardening, good corrosion resistance, good weldability and poor machinability. Uses are mainly used for low load parts requiring high plasticity and good weldability in liquid or gaseous media, such as fuel tanks, gasoline or lube oil conduits, various liquid containers and other small load parts made with deep drawing: Wire is used to make rivets
Aluminum Diamond Plate 3003-H22 is easy to fabricate and its raised diamond pattern provides good slip resistance and walking stability. Application and uses of Aluminum diamond tread plate 3003-H22 bright are: extensive product use as scuff plates, running boards, and mud flaps for fire engines, ambulances, fire trucks, trailers and toolboxes, recreational, and four-wheel-drive vehicle
1050 aluminum sheet belongs to commercially pure wrought family with a purity of 99.5% Aluminum. Except Al, 0.4% of Fe is added to 1050 aluminum sheet, thus, it has high electrical conductivity. 1000 series aluminum group offers the best correction resistance compared to any alloy group, so does the 1050 aluminum sheet
Surface: mill finish, brushed, anodized, polished etc.
Standard: GB, EN, ASTM, DIN
Factory Certificate: ISO9001
Packing: seaworthy wooden pallet or customized
Loading Port: Shanghai, Ningbo, Tianjin, Qingdao
1050 4x8 diamond aluminum plate sheets structure novel, non-slip effect. Light weight, excellent durability. The quality of about 7kg per square meter, the tensile strength of 200N per square millimeter, aluminum extension of high relative elongation higher than 10%, can withstand high bending without breaking, good toughness.
Specification of 1050 4x8 diamond plate sheets
Temper H*2,H*4,T4,T6
Thickness(mm): 1.2-7.0
Widthness(mm): 100-1650
Length(mm) : 500-16000
Aluminum alloy 3105 is essentially a 98% aluminum alloy with minor additions to increase strength over that of alloy 1100 and 3003. It is not hardenable by heat treatment and it has good corrosion resistance,
formability and weldability.Aluminum alloy 3105 is most commonly used where a painted finish is desired.
Aluminum alloy 3105 is most commonly used where a painted finish is desired. Typical applications include general sheet metal work requiring greater strength than is provided by 1000 series aluminum alloys, residential siding, mobile homes and sign making.
3105 Aluminum plate is typically used for floor covering, access ramps, step ladders, slip resistance surfaces, wall and column protection to prevent impact damage, commercial vehicles, refrigerated trucks, cold rooms, vans, busses, trailers, pickup trucks and general sheet metal works
Diamond plate , also known as checker plate, tread plate and Durbar floor plate, is a type of metal stock with a regular pattern of raised diamonds or lines on one side, with the reverse side being featureless. Diamond plate is usually steel, stainless steel or aluminum.
5052-H32 is optimal for sheet metal work because of its ability to allow for a tight radius while bending. 5052-H32 contains 2.5% magnesium. It is one of the highest strength alloys of the non-heat treatable grades. ... 6061-T6 is the most commonly used aluminum alloys
5052-H32 Aluminum Sheet is commonly used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums. It is nonmagnetic and not heat treatable
Diamond plate aluminum can be challenging to weld, especially while keeping its attractive cosmetic appearance. The combination of flat and raised surfaces has traditionally presented a problem as well. We can supply stronger, more attractive welds on aluminum diamond plates at lower cost, with higher strength and quality than is commercially feasible. We can also help you produce them under our license if desired. Some advantages of our patented weld process include:
Diamond Plate Aluminum Tread Bright (3003-H22) is a sheet product with a raised diamond pattern and a bright shiny finish for decorative and non-skid applications
Height of the bar: 0.6-1.2mm
Delivery Detail: 15-20days
Length: As Customer's Requirement
Surface: mill finished, painted, brushed, anodized, polished etc.
Surface protection: oleo phobic coating, protective film etc
Productive technology: hot rolling
Standard: GB/T3880, ASTM B209, etc
Factory Certificate: ISO9001
Packing: seaworthy wooden pallet or customized
Loading Port: Shanghai, Ningbo, Tianjin, Qingdao
Our packing meets the sea export standard. PE/PVC protective film or white paper could be covered as customer's need. Special requirements of packing could be negotiate before order.
Diamond plate, also known as checker plate, tread plate and Durbar floor plate, is a type of metalstock with a regular pattern of raised diamonds or lines on one side, with the reverse side being featureless
3003 diamond aluminum tread plate has good corrosion prevention ability, so it can be used for ship deck, floor of the cold storage, truck floor and body. Our customers also use it to make boxes, for decoration. Besides, it is widely used in construction.
Alloy available: 1050 1060 1100 3003, 3105, 5052, 5005, 5754 5083 5182, 6061 6063 6082, 7075, 8011…
Temper: HO, H111,H12, H14, H24,H 32, H112, T4, T6, T5,T651
Surface:Mill/Emboss/Diamond/2bar/3bars/Bright
Thickness: 0.2mm to 300mm
Width: 30mm to 2300mm
Length:1000mm to 10000mm.
| Chemical Analysis of aluminum alloy diamond plate | ||||||||||
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | Remains |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | - | - | - | - | - | Remains |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | - | - | Remains |
| 1100 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | - | - | 0.1 | - | - | Remains |
| 1200 | 1 | 1 | 0.05 | 0.05 | - | - | - | 0.1 | 0.05 | Remains |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | Remains |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | Remains |
| 5042 | 0.2 | 0.35 | 0.15 | 0.2--.5 | 3.0-4.0 | 0.1 | - | 0.25 | 0.1 | Remains |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | Remains |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | Remains |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | - | Remains |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | Remains |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45 | 0.1 | - | 0.1 | - | Remains |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.2 | - | Remains |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | - | 5.7-6.7 | 0.06 | Remains |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | 0.2 | Remains |
){kind=link}