1050/1060/1100/3003/3102/8011 Factory Customized Aluminium Coil Aluminum Plain Flat Plate Sheet

Factory Customized Aluminium coil Aluminum Plain Flat Plate sheet with PE Film One Side 1050/1060/1100/3003/3102/8011

Aluminum diamond plate, sometimes called aluminum tread plate, aluminum floor plate, or aluminum cable.

Diamond aluminium tread plate or floor plate is widely used for a variety of structural, architectural and cosmetic applications. A method has been developed to roll metal plates with an upraised "lug" pattern, providing the customer with several choices to best meet the needs of the project, with specific qualities of cleanability, impact resistance, support strength, and corrosion resistance.

Aluminum alloy 3105 is essentially a 98% aluminum alloy with minor additions to increase strength over that of alloy 1100 and 3003. It is not hardenable by heat treatment and it has good corrosion resistance,

formability and weldability.Aluminum alloy 3105 is most commonly used where a painted finish is desired.

Aluminum alloy 3105 is most commonly used where a painted finish is desired. Typical applications include general sheet metal work requiring greater strength than is provided by 1000 series aluminum alloys, residential siding, mobile homes and sign making.

3105 Aluminum plate is typically used for floor covering, access ramps, step ladders, slip resistance surfaces, wall and column protection to prevent impact damage, commercial vehicles, refrigerated trucks, cold rooms, vans, busses, trailers, pickup trucks and general sheet metal works

Diamond plate , also known as checker plate, tread plate and Durbar floor plate, is a type of metal stock with a regular pattern of raised diamonds or lines on one side, with the reverse side being featureless. Diamond plate is usually steel, stainless steel or aluminum.

5052-H32 is optimal for sheet metal work because of its ability to allow for a tight radius while bending. 5052-H32 contains 2.5% magnesium. It is one of the highest strength alloys of the non-heat treatable grades. ... 6061-T6 is the most commonly used aluminum alloys

5052-H32 Aluminum Sheet is commonly used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums. It is nonmagnetic and not heat treatable

Diamond plate aluminum can be challenging to weld, especially while keeping its attractive cosmetic appearance. The combination of flat and raised surfaces has traditionally presented a problem as well. We can supply stronger, more attractive welds on aluminum diamond plates at lower cost, with higher strength and quality than is commercially feasible. We can also help you produce them under our license if desired. Some advantages of our patented weld process include:

• High strength, cosmetic welds of aluminum, including diamond plate.
• No limitations for flat vs. raised surface for a high strength weld.
• Only spot-welding process in the world which can accomplish this.
• Able to inexpensively weld thickness combinations up to 8:1 thickness ration (example from treadplate to truck sidewall/pillars)
• Particularly useful in truck and trailer applications.
• Able to produce quantities of welded parts in quantities of millions per year in our facility or licensing for on-site application

Diamond Plate Aluminum Tread Bright (3003-H22) is a sheet product with a raised diamond pattern and a bright shiny finish for decorative and non-skid applications

Height of the bar: 0.6-1.2mm
Delivery Detail: 15-20days
Length: As Customer's Requirement
Surface: mill finished, painted, brushed, anodized, polished etc.
Surface protection: oleo phobic coating, protective film etc
Productive technology: hot rolling
Standard: GB/T3880, ASTM B209, etc
Factory Certificate: ISO9001
Packing: seaworthy wooden pallet or customized

Loading Port: Shanghai, Ningbo, Tianjin, Qingdao

Our packing meets the sea export standard. PE/PVC protective film or white paper could be covered as customer's need. Special requirements of packing could be negotiate before order.

Diamond plate, also known as checker plate, tread plate and Durbar floor plate, is a type of metalstock with a regular pattern of raised diamonds or lines on one side, with the reverse side being featureless

3003 diamond aluminum tread plate has good corrosion prevention ability, so it can be used for ship deck, floor of the cold storage, truck floor and body. Our customers also use it to make boxes, for decoration. Besides, it is widely used in construction.

Alloy available: 1050 1060 1100 3003, 3105, 5052, 5005, 5754 5083 5182, 6061 6063 6082, 7075, 8011…
Temper: HO, H111,H12, H14, H24,H 32, H112, T4, T6, T5,T651
Surface:Mill/Emboss/Diamond/2bar/3bars/Bright
Thickness: 0.2mm to 300mm
Width: 30mm to 2300mm
Length:1000mm to 10000mm.